CABLE ASSEMBLIES FOR MEADE LS TELESCOPES & ACCESSORIES, TELESCOPE CABLES, TELESCOPE HAND CONTROLLER CABLES & CCD CABLES
Nelson Devices values the quality of our products designed and made for our customers. All our cable assemblies are inspected and tested before packaged and shipped.
Meade After-market ETX Straight Hand controller cable
6’ to 25’ Lengths available
Brief Description
Listed is a hand controller cable for all LX55/75& ETX scopes. straight design UTP Level V data rate. Tested with penta-scanner.
Great for a backup or spare!
Meade #505 Compatible RS232 Serial Cable
White for better night visibility & safety from cord wrap. Available from 6’ to 25’ Lengths.
Brief Description
This 505 Connector Cable Set is 100% compatible to the #07505. This is a PC to AutoStar or AudioStar connector cable only. Allows connection of a Meade 497 AutoStar or Meade AutoStar keypad to a PC serial port using Meade AutoStar Suite software, available for free download at:
www.Meade.com. When used with appropriate software it allows for telescope control from the PC, downloading software updates, and cloning one keypad to another so you can share user created databases. Software not included. New white design is great for better night vision and safety. Recommended for:
All DS Models, All DS2000 Models, All ETX Models ,Star Navigator & NG models, LXD55, LX65, LXD75, LX80, LX90 and LT models.
Penta-scanner tested.
Great for a backup or spare!!
Meade #505 Compatible RS232 Serial Adapter
$9.95 #505ADPT
This 505 Connector Adapter is 100% compatible to the #07505. This is a PC to AutoStar or AudioStar connector cable only. Allows connection of a Meade 497 AutoStar or Meade AutoStar keypad to a PC serial port using Meade AutoStar Suite software, available for free download at:
www.Meade.com. When used with appropriate software it allows for telescope control from the PC, downloading software updates, and cloning one keypad to another so you can share user created databases. Software not included. New white design is great for better night vision and safety. Recommended for: All DS Models All DS2000 Models All ETX Models All LX80, 90 and all other models,
Power cable for all meade LS Series scopes and others
2 sizes to choose from. (Custom Lengths are availble with larger gauges)
#90D-PWR-CA-XX
Brief Descp:
Power cable for all meade LS series scopes and others that except the 5.5mm / 2.5mm DC connector w/ center (+). These cables are white in design for dark sites & low light for safety and visibility from cord wrap, etc.
Disclaimer: We are not responsible for damage or repairs required as a consequence of misuse or applications other than the intended use of this product. This includes damage due to improper connectivity of any electronic equipment other than what is specified. Please verify all your connection requirements, safety measures, polarity, hot plugging, etc. If you have any questions, please contact us
Meade #607 replacement DC power cable #MED-607-5
Price
$10.95
Brief Description
Listed ia a DC power cable approx 5'
fused and LED also has ferite coil on it. Works with Meade ETX90, ETX-125, LXD-75, LS and LT models, LX90 models, LX200GPS and ACF models up to 14" diameter, all RCX/LX400 models, LX600, LX850, and other models which have a 12V "phono" type power input jack.
Note: not compatible with DS-2000 series telescopes, 18 volt LX200 "Classic models, or 16" LX200 which require 18 volts.
Celestron power tank cable for all Meade LS scopes (12V) and others
2 sizes to choose from. (Custom Lengths are available with larger gauges)
#CEL-PT-MEADE-XX
Brief Descp:
This power cable is designed for the Meade telescopes (12v) systems to use with the Celestron power tanks. Works for all Meade ETX scopes (12v) and others that except the 5.5mm / 2.5mm DC connector w/ center (+). Has Farite Coil, 90° plug head for strain relief and low profile panel interface. These cables are white in design for dark sites & low light for safety and visibility from cord wrap, etc.
Meade After-market ETX/LX Straight Hand controller Flatwire design
6’ to 25’ Lengths available
Brief Description
Listed is a hand controller cable for all LX55/75& ETX scopes. straight design new light weight flatwire design. Tested with penta-scanner.
Great for a new look, backup or spare!
CONTACT US
Nelson Devices LLC
1979 Chub Lake Rd
Roxboro, NC 27574
919-561-0192
©2022 NelsonDevices, LLC. All Rights Reserved.