Disclaimer: We are not responsible for damage or repairs required as a consequence of misuse or applications other than the intended use of this product. This includes damage due to improper connectivity of any electronic equipment other than what is specified. Please verify all your connection requirements, safety measures, polarity, hot plugging, etc. If you have any questions, please contact us
CUSTOM CABLE ASSEMBLIES FOR SBIG PRODUCTS
6' SBIG CCD Autoguider (D-15) Cable to PECTelescopes #SBG-CCD-XX
Brief Description
6' cable assebly for the SBIG CCD Autoguider Interface. (D-15cable to PEC telescope (RJ-12/14) connection configuration.
SBIG Autogide/relay 6’ replacement cable #SBG06
Brief Description
Upgrade/replacement cable. it connects the CCD port to the autoguider for tracking, also known as a relay cable. RJ12 to RJ12
SBIG Relay adapter box cable #SBG-RLY-06
Brief Description
Upgrade/replacement cable. it connects the CCD Port to the autoguider for tracking, also known as a relaycable. RJ11 to DB9 Interface.
SBIG TYPE CCD /GUIDE PORT REPLACEMENT CABLE #SBG4-XX
These are use this to connect the guide port on your SBIG camera to the guide input port on your telescope mount.
This is a “flipped” cable, the standard for telephone-style cable wiring, where the left-most conductor on one end becomes the right-most conductor on the opposite end. It has the 6p6c RJ-12 style modular telephone connector.
When people refer to the “ST-4” guider port or more correctly “SG-4” port, this is the cable that fits the port utilizing the pin #2 ground systems. Available in Stock 6’-25’ and custom lengths.
SBIG TYPE CCD/GUIDE PORT REPLACEMENT CABLE FOR CELESTRON MOUNTS. #SBIG-CEL-XX
Upgrade/replacement cable for Celestron. It connects the CCD port to the autoguider for tracking, RJ12 to RJ12
CONTACT US
Nelson Devices LLC
1979 Chub Lake Rd
Roxboro, NC 27574
919-561-0192
©2022 NelsonDevices, LLC. All Rights Reserved.