CUSTOM CABLE ASSEMBLIES FOR OPTEC EQUIPMENT & ACCESSORIES

Nelson Devices values the quality of our products designed and made for our customers. All our cable assemblies are inspected & tested before packaged and shipped.


For those international and are interested in purchasing here, Please click here and provide us your address and what you would like to purchase for the most affordable and quickest shipping service to your door.

Name

Serial Communication Cable & DB9 Adapter 6' (3M) OPTC-SERL-6

Price

$19.95

Brief Description

This is a reverse serial cable w/ female DB9 serial adapter. fully tested.

Quantity:

Name

Serial Communication Cable & DB9 Adapter12' (6M) #OPTC-SERL-12

Price

$24.95

Brief Description

This is a reverse serial cable w/ female DB9 serial adapter. fully tested.

Quantity:

Name

Serial Communication Cable & DB9 Adapter 25' (8M) #OPTC-SERL-25

Price

$29.95

Brief Description

This is a reverse serial cable w/ female DB9 serial adapter. fully tested.

Quantity:

Name

Optec Atermarket Control Cable for TCF-S & IFW 6' (3m) #OPTC-TCF-CNTL-6

Price

$24.95

Brief Description

This is a cable assembly for TCF-S & IFW devices. The control cable is comprised of an eight wire (four twisted pair) cable with a RJ-45 connector on one end and a 9-pin sub-D connector on the other. The RJ-45 connector is inserted into a mating jack in the TCF-S or IFW control box. The sub-D connector is connected to the mating DB-9 connector on the TCF-S motor housing or IFW filter wheel. Fully penta scanner tested.

Quantity:

Name

Optec Atermarket Control Cable for TCF-S & IFW 12' (6m) #OPTC-TCF-CNTL-12

Price

$21.95

Brief Description

This is a cable assembly for TCF-S & IFW devices. The control cable is comprised of an eight wire (four twisted pair) cable with a RJ-45 connector on one end and a 9-pin sub-D connector on the other. The RJ-45 connector is inserted into a mating jack in the TCF-S or IFW control box. The sub-D connector is connected to the mating DB-9 connector on the TCF-S motor housing or IFW filter wheel. Fully penta scanner tested.

Quantity:

Name

Optec Atermarket Control Cable for TCF-S & IFW 25' (8m) #OPTC-TCF-CNTL-25

Price

$28.95

Brief Description

This is a cable assembly for TCF-S & IFW devices. The control cable is comprised of an eight wire (four twisted pair) cable with a RJ-45 connector on one end and a 9-pin sub-D connector on the other. The RJ-45 connector is inserted into a mating jack in the TCF-S or IFW control box. The sub-D connector is connected to the mating DB-9 connector on the TCF-S motor housing or IFW filter wheel. Fully penta scanner tested.

Quantity:

Name

Optec Atermarket Control Cable for TCF-S & IFW 50' (16m) #OPTC-TCF-CNTL-50

Price

$37.95

Brief Description

This is a cable assembly for TCF-S & IFW devices. The control cable is comprised of an eight wire (four twisted pair) cable with a RJ-45 connector on one end and a 9-pin sub-D connector on the other. The RJ-45 connector is inserted into a mating jack in the TCF-S or IFW control box. The sub-D connector is connected to the mating DB-9 connector on the TCF-S motor housing or IFW filter wheel. Fully penta scanner tested.

Quantity:

Name

Null Modem / Serial Cable 6' (3m) #NMSC06

Price

$9.95

Brief Description

Note: The SSP photometer line and Perseus 4-port Instrument Selector each use a standard DB9 connector with standard RX, TX, and GND ports connected. A "Null Modem" serial cable is required to make the connection to a PC's 9-pin DB9 serial port. Available in lengths from 6-ft (2m) to 25-ft (8m) these serial cables feature a female DB9 connector on both end with locking thumbscrews.

Quantity:

Name

Null Modem / Serial Cable 12' (6m) #NMSC12

Price

$13.95

Brief Description

Note: The SSP photometer line and Perseus 4-port Instrument Selector each use a standard DB9 connector with standard RX, TX, and GND ports connected. A "Null Modem" serial cable is required to make the connection to a PC's 9-pin DB9 serial port. Available in lengths from 6-ft (2m) to 25-ft (8m) these serial cables feature a female DB9 connector on both end with locking thumbscrews.

Quantity:

Name

Null Modem / Serial Cable 25' (8m) #NMSC25

Price

$18.95

Brief Description

Note: The SSP photometer line and Perseus 4-port Instrument Selector each use a standard DB9 connector with standard RX, TX, and GND ports connected. A "Null Modem" serial cable is required to make the connection to a PC's 9-pin DB9 serial port. Available in lengths from 6-ft (2m) to 25-ft (8m) these serial cables feature a female DB9 connector on both end with locking thumbscrews.

Quantity:

Disclaimer: We are not responsible for damage or repairs required as a consequence of misuse or applications other than the intended use of this product. This includes damage due to improper connectivity of any electronic equipment other than what is specified. Please verify all your connection requirements, safety measures, polarity, hot plugging, etc.   If you have any questions, please contact us